Four Ways to Tell Your Propane Tank Needs a Refill
Running out of propane on a cold January night in Briscoe County isn’t just inconvenient — it can mean a house that won’t heat, a water heater that won’t fire, and a service call that could have been avoided. We’ve been delivering propane to homes and ranches across the Texas Panhandle since 1972, and the most common thing we hear from customers who ran out is: “I thought we had more than that.”
Here are four reliable ways to check your propane level before it becomes a problem.
1. Read the Gauge — But Know Its Limits
Most residential and agricultural propane tanks have a float gauge on top, similar to the fuel gauge in a pickup truck. The dial shows a percentage — not gallons — and tells you roughly how full the tank is. A reading of 30% on a 500-gallon tank means you have approximately 150 gallons left.
The 20% rule: Schedule a propane tank refill when your gauge hits 20%. That gives us time to get your delivery on the calendar before you run critical, and it accounts for the gauge’s margin of error. Don’t wait for 10%.
One caveat: float gauges can stick. If the needle hasn’t moved in a while despite regular use, the float mechanism inside the tank may be frozen in place. If you suspect your gauge isn’t reading accurately, use one of the backup methods below to double-check before you assume you’re fine.
2. The Hot Water Test
This is the simplest field check for smaller tanks — grill tanks, secondary tanks, or any tank you can get your hands on.
Fill a cup or small pitcher with hot tap water. Pour it slowly down one side of the tank from top to bottom. Then run your hand along that same path. Where the tank wall feels cold, you still have propane. Where it feels warm, that section is empty.
Propane absorbs heat from whatever it contacts, which is why the liquid level shows up as a temperature difference on the outside of the tank. It’s not a precise measurement, but it tells you quickly whether you’re running close to empty or have a solid amount left.
3. Weigh the Tank
This method is most practical for portable cylinders — grill tanks, generator tanks, and exchange tanks — and it’s more accurate than the hot water test.
Every propane cylinder has a “TW” number stamped on the collar. That’s the tare weight: the empty weight of the tank itself. A standard 20-pound grill cylinder typically has a tare weight around 17 pounds.
Set the tank on a bathroom scale. Note the total weight. Subtract the TW number. What’s left is the weight of the propane still inside.
Example: Your tank reads 24 lbs on the scale. The collar stamp says TW = 17. Subtract: 24 - 17 = 7 lbs of propane remaining — a little over a third of a full tank.
For standard 20 lb tanks, a full fill adds about 20 lbs of propane. So 7 lbs means you have roughly 35% of a full tank left. Not empty, but getting there.
4. Watch for Behavioral Signs
Your appliances will usually tell you before the gauge does. These are the signs we hear about most from customers around Silverton, Quitaque, and Turkey:
- Weak or uneven flame on a gas range or grill. If one burner runs low while another runs normal, low gas pressure is a common cause.
- Pilot light won’t stay lit on a water heater or furnace. Low pressure makes it hard for the pilot to maintain a stable flame.
- Heater fires up but the house stays cold. The burner lights but can’t sustain proper output.
- Appliances running slower than usual. A gas dryer taking twice as long, or a water heater struggling to recover — these can point to low supply pressure.
And one that’s not about low gas at all: if you smell rotten egg near any propane appliance or tank, that’s a safety issue. Leave the area without flipping any switches, get everyone out, and call us — or 911 if necessary.
What Happens If the Tank Runs Completely Empty
This is worth knowing, because it changes what the next steps look like.
When a propane system runs completely out of fuel, air and moisture enter the lines. Before a technician can refill the tank and safely restart your system, the lines need to be pressure-tested and checked for leaks — a step that takes additional time and adds cost to the service call. When it’s the middle of winter and demand is high, wait times are longer.
In practical terms: running out of propane in January in Briscoe County means your heat, hot water, and cooking may all be offline for a day or more while you wait for service. Out here, where the nearest hotel is in Tulia or Crosbyton, that’s not a small inconvenience.
The 20% rule exists for a reason. Check your gauge once a month during the heating season and after any period of heavy use.
Scheduling a Propane Tank Refill in Briscoe County
We deliver propane to homes, farms, and ranches throughout Briscoe County and the surrounding communities — Quitaque, Turkey, Tulia, and beyond. We’ve done this work in this part of the Panhandle for over 50 years. We know the roads, we know the customers, and we know what it means to run out of fuel on a cold night out here.
If your gauge is approaching 20% — or if you’re not sure where you stand — give us a call at (806) 823-2451. You can also learn more about our propane delivery service and what to expect when you schedule a fill.
Don’t wait until the gauge is on empty. A quick check this week prevents a lot of trouble when the weather turns.
